Uncategorised

1)  YB43 Packer
This product is used for hard packet carton packing of cigarettes with length of 84~100mm with different diameters, and in different arrangements (10’s in 5-5, 12’s in 6-6, 16’s in 8-8, and 20’s in 7-6-7 or 10-10 arrangements).

Features:
•It has features of slow starting, automatic protecting, automatic detecting, ejecting and failure indicating, easy operation, and convenient maintenance, which makes it and ideal cigarettes packing unit for small and medium size cigarette factory.
•Especially, with its low cost, good packing quality, and stable performance, it is suitable for special such as slim packing, long cigarette packing, round corner packing, octagonal packing, and 10’s ~ 16’s packing.

Technical Specifications:
•Capacity: 180 packs/min 
•Cigarette Specification: Length: 84~100mm; Diameter: 5.4~8mm
•Packet Size: 87.5x56x23.5mm(King Size)
•Carton Size: 283x90x48.5mm(King Size)

ZJ19  (PASSIM 7000) Cigarette making and plug assembling machine combination is manufactured  by Xuchang Tobacco Machinery Co., LTD through absorbing and digesting the  technology imported from Molins Company, England by CNTC. This combination's  production's speed is up to 8000cig/min after being improved by Xuchang Tobacco  Co, Ltd and has the following advantages:

1.High  speed. Its production speed is 7000 cig/min ~ 8000 cig/min.

2.The  quality of the produced cigarette is good-The tobacco breakage rate and the stem  contents are low. The weight is automatically controlled. The dense end position  is automatically calibrated. The devices of the perfect tobacco supply, the  tobacco sucking and the rod formation, the cut, the separation and the tip  turning, the automatic inspection and the automatic rejection. Etc can be  guaranteed.

3.High  automation—Automatic tobacco supply, Automatic paper supply automatic gum supply  knife advance etc. Fault automatic inspection and automatic display. The  defective cigarettes are automatically rejected. Automatic  Lubrication.

4.Programmable  Login Controller (PLC) is used in the electrical control system.

5.Module  configuration design –The time of the installation and test is shot. It is easy  for operation and maintenance.

6.Good  safety and low noise—All the tight guards which are equipped with safety  interlock switches ensure that is safe for the operator to operate; and the  noise eliminated materials are good, and the sealings ensure that the machine  inside is clean, and the machine outside noise is low.

7.The  complete compressed air system and high-pressure system.

8.It  can meet the different requirements of cigarette specifications, working mode,  layout plan etc to the customers

Model ZJ17, a high-speed cigarette making and filter assembling machine group, is made under introducing the technology of PROTOS 70 from Hauni Maschinebau AG Germany by China National Tobacco Corporation, in the way of Technology-Trade combined cooperation in 1992. It is manufactured by Changde Tobacco Machinery Co., Ltd after technology digestion and absorption, innovation and improvement, having features as follows:

　　1. Stable production: The cigarette output is 7000cig/min, the max. tobacco rod forming speed is 490m/min.

　　2. Ensure high quality cigarettes, and automatically detect air leakage, loose end, filter missing, soft spots, hard spots, too light, too heavy and other substandard cigarettes in the production process.

　　3. Complete trouble- shooting system: It can automatically test the faults when it goes wrong, and then raise the alarm, display the faults, stop running to analyze and make statistics on faults.

　　4. Complete weight control system: It measure cigarette weight with high-precision control, and it can offset automatically to save cut tobacco, greatly reducing the production cost of cigarette factories.

　　5. Automatic monitoring performed in manufacturing process: It can automatically analyze, make statistics and management for production data, and output the data in report forms.

　　6. Convenient and efficient human-computer interaction system.

　　7. With small volume and weight, less area is possessed.